Metric tire size

205/75R14 tire size

A 205/75R14 tire is 26.1 inches (663 mm) tall and 8.1 in wide, for a 14-inch wheel, with a 6.1 in sidewall. That is the nominal size worked out from the code. Makers publish 26–26.1 in for real 205/75R14 tires (2 makers).

Diameter26.1 in663 mm

Width8.1 in205 mm

Sidewall6.1 in154 mm

Revs per mile773nominal, published 795–799

Wheel width5–7 inapproved by every listing

Compare 205/75R14 with other sizes

Set up for: comparing 205/75R14 with a size you're considering · Different situation?

Your current size

Current tire size

e.g. 265/70R17, 2657017 or 33x12.50R20

Where do I find my size?

It's on the tire sidewall, e.g. P265/70R17 115T, and on the tire placard sticker on the driver's door jamb (also in the owner's manual). The placard shows the size the vehicle came with; the sidewall shows what is fitted now. If they differ, use the placard as your starting point. Digits are enough here: 2657017 or 33125020.

Size you're considering

Size you're considering (2)

Real 205/75R14 tires: published diameters

Figures from the makers' own data books. They differ from the 26.1 in calculated figure because each tread design and construction measures slightly differently.

Maker (data book)	Published diameter	Revs per mile	Approved wheel width	Listings
Hankook	26 in	799	5–7 in	1
Toyo	26.1 in	795	5–7 in	1

Sources: maker data books (PDF), checked 2026-11-05. Brand names identify the data source only.

Equivalent sizes on other wheels

Sizes that appear in the maker data books with a diameter within 3% of 205/75R14. Same diameter is only one part of fitting a different size.

Wheel	Real sizes within 3% (closest first)
15-inch	235/60R15 (26.1 in, ±0.0%), 215/65R15 (26.0 in, −0.4%), 205/70R15 (26.3 in, +0.7%)
16-inch	215/60R16 (26.2 in, +0.2%), 255/50R16 (26.0 in, −0.3%), 225/55R16 (25.7 in, −1.4%)
17-inch	255/45R17 (26.0 in, −0.3%), 285/40R17 (26.0 in, −0.5%), 235/50R17 (26.3 in, +0.6%)
18-inch	295/35R18 (26.1 in, +0.1%), 255/40R18 (26.0 in, −0.3%), 225/45R18 (26.0 in, −0.5%)
20-inch	255/30R20 (26.0 in, −0.3%), 225/35R20 (26.2 in, +0.4%), 305/25R20 (26.0 in, −0.4%)

Popular comparisons with 205/75R14

205/75R14 vs 215/75R14+2.3% diameter 215/70R14 vs 205/75R14+1.0% diameter

FAQ

How tall is a 205/75R14 tire?

26.1 inches (663 mm) calculated from the size code. Makers publish 26–26.1 in for real tires in this size; the difference comes from tread design and construction.

How do you work out the 205/75R14 diameter?

Sidewall = 205 mm × 75% = 153.8 mm. Diameter = 14 in wheel + 2 × 153.8 mm ÷ 25.4 = 26.11 in.

Is 205/75R14 a 26-inch tire?

It is about 26.1 in tall nominally, so it is close to 26 inches. Real tires in a size vary slightly by model; check the maker's spec sheet for the exact tire.

What sizes are equivalent to 205/75R14?

Real sizes within 3% of its diameter include 215/60R16 (+0.2%), 255/45R17 (−0.3%), 295/35R18 (+0.1%) and 255/30R20 (−0.3%). Equal diameter alone doesn't make a size suitable: wheel width, offset, clearance and load rating all matter.

How many revolutions per mile does a 205/75R14 make?

About 773 calculated from its unloaded diameter. Makers publish 795–799 revs per mile, measured under load (a loaded tire rolls on a slightly smaller radius), which is why published figures are higher.

Open 205/75R14 in the converter · Tire size chart

Important: These are calculated (nominal) dimensions, not a fitment recommendation. Real tires of the same size differ by brand and model (makers allow about ±3% of section height), and width changes with the rim it is mounted on. The math can't see wheel width and offset, clearance at full steering lock and suspension travel, load index, speed rating, or what your vehicle maker approves. Before changing size, check your door-jamb placard and owner's manual and ask a tire professional. A replacement tire must meet or exceed the load index and speed rating on the placard.