Metric tire size

245/45R20 tire size

A 245/45R20 tire is 28.7 inches (728 mm) tall and 9.6 in wide, for a 20-inch wheel, with a 4.3 in sidewall. That is the nominal size worked out from the code. Makers publish 28.4–28.9 in for real 245/45R20 tires (7 makers).

Diameter28.7 in728 mm

Width9.6 in245 mm

Sidewall4.3 in110 mm

Revs per mile703nominal, published 720–730

Wheel width7.5–9 inapproved by every listing

Compare 245/45R20 with other sizes

Set up for: comparing 245/45R20 with a size you're considering · Different situation?

Your current size

Current tire size

e.g. 265/70R17, 2657017 or 33x12.50R20

Where do I find my size?

It's on the tire sidewall, e.g. P265/70R17 115T, and on the tire placard sticker on the driver's door jamb (also in the owner's manual). The placard shows the size the vehicle came with; the sidewall shows what is fitted now. If they differ, use the placard as your starting point. Digits are enough here: 2657017 or 33125020.

Size you're considering

Real 245/45R20 tires: published diameters

Figures from the makers' own data books. They differ from the 28.7 in calculated figure because each tread design and construction measures slightly differently.

Maker (data book)	Published diameter	Revs per mile	Approved wheel width	Listings
BFGoodrich	28.6 in	726	7.5–9 in	1
Falken	28.7–28.9 in	720–725	7.5–9 in	2
Goodyear	28.7 in	729	7.5–9 in	1
Hankook	28.4–28.5 in	728–730	7.5–9 in	4
Nitto	28.66–28.74 in	—	7.5–9 in	2
Toyo	28.7 in	725	7.5–9 in	1
Uniroyal	28.6 in	726	7.5–9 in	1

Sources: maker data books (PDF), checked 2026-11-05. Brand names identify the data source only.

Equivalent sizes on other wheels

Sizes that appear in the maker data books with a diameter within 3% of 245/45R20. Same diameter is only one part of fitting a different size.

Wheel	Real sizes within 3% (closest first)
15-inch	235/75R15 (28.9 in, +0.7%), 255/70R15 (29.1 in, +1.3%), 225/75R15 (28.3 in, −1.4%)
16-inch	235/70R16 (29.0 in, +0.9%), 225/70R16 (28.4 in, −1.0%), 255/65R16 (29.1 in, +1.3%)
17-inch	225/65R17 (28.5 in, −0.6%), 275/55R17 (28.9 in, +0.8%), 235/65R17 (29.0 in, +1.2%)
18-inch	225/60R18 (28.6 in, −0.2%), 245/55R18 (28.6 in, −0.2%), 305/45R18 (28.8 in, +0.4%)
20-inch	315/35R20 (28.7 in, ±0.0%), 275/40R20 (28.7 in, −0.1%), 305/35R20 (28.4 in, −1.0%)
22-inch	285/30R22 (28.7 in, +0.2%), 335/25R22 (28.6 in, −0.3%), 275/30R22 (28.5 in, −0.6%)

FAQ

How tall is a 245/45R20 tire?

28.7 inches (728 mm) calculated from the size code. Makers publish 28.4–28.9 in for real tires in this size; the difference comes from tread design and construction.

How do you work out the 245/45R20 diameter?

Sidewall = 245 mm × 45% = 110.2 mm. Diameter = 20 in wheel + 2 × 110.2 mm ÷ 25.4 = 28.68 in.

Is 245/45R20 a 29-inch tire?

It is about 28.7 in tall nominally, so it is close to 29 inches. Real tires in a size vary slightly by model; check the maker's spec sheet for the exact tire.

What sizes are equivalent to 245/45R20?

Real sizes within 3% of its diameter include 235/70R16 (+0.9%), 225/65R17 (−0.6%) and 225/60R18 (−0.2%). Equal diameter alone doesn't make a size suitable: wheel width, offset, clearance and load rating all matter.

How many revolutions per mile does a 245/45R20 make?

About 703 calculated from its unloaded diameter. Makers publish 720–730 revs per mile, measured under load (a loaded tire rolls on a slightly smaller radius), which is why published figures are higher.

Open 245/45R20 in the converter · Tire size chart

Important: These are calculated (nominal) dimensions, not a fitment recommendation. Real tires of the same size differ by brand and model (makers allow about ±3% of section height), and width changes with the rim it is mounted on. The math can't see wheel width and offset, clearance at full steering lock and suspension travel, load index, speed rating, or what your vehicle maker approves. Before changing size, check your door-jamb placard and owner's manual and ask a tire professional. A replacement tire must meet or exceed the load index and speed rating on the placard.