Metric tire size

275/35R20 tire size

A 275/35R20 tire is 27.6 inches (700 mm) tall and 10.8 in wide, for a 20-inch wheel, with a 3.8 in sidewall. That is the nominal size worked out from the code. Makers publish 27.3–27.87 in for real 275/35R20 tires (7 makers).

Diameter27.6 in700 mm

Width10.8 in275 mm

Sidewall3.8 in96 mm

Revs per mile731nominal, published 749–760

Wheel width9–11 inapproved by every listing

Compare 275/35R20 with other sizes

Set up for: comparing 275/35R20 with a size you're considering · Different situation?

Your current size

Current tire size

e.g. 265/70R17, 2657017 or 33x12.50R20

Where do I find my size?

It's on the tire sidewall, e.g. P265/70R17 115T, and on the tire placard sticker on the driver's door jamb (also in the owner's manual). The placard shows the size the vehicle came with; the sidewall shows what is fitted now. If they differ, use the placard as your starting point. Digits are enough here: 2657017 or 33125020.

Size you're considering

Size you're considering (2)

Real 275/35R20 tires: published diameters

Figures from the makers' own data books. They differ from the 27.6 in calculated figure because each tread design and construction measures slightly differently.

Maker (data book)	Published diameter	Revs per mile	Approved wheel width	Listings
BFGoodrich	27.5 in	755	9–11 in	1
Falken	27.6–27.7 in	749–753	9–11 in	2
Goodyear	27.6 in	758	9–11 in	1
Hankook	27.3–27.4 in	758–760	9–11 in	3
Nitto	27.56–27.87 in	—	9–11 in	3
Toyo	27.6 in	754	9–11 in	1
Uniroyal	27.5 in	755	9–11 in	1

Sources: maker data books (PDF), checked 2026-11-05. Brand names identify the data source only.

Equivalent sizes on other wheels

Sizes that appear in the maker data books with a diameter within 3% of 275/35R20. Same diameter is only one part of fitting a different size.

Wheel	Real sizes within 3% (closest first)
15-inch	215/75R15 (27.7 in, +0.4%), 225/70R15 (27.4 in, −0.6%), 325/50R15 (27.8 in, +0.8%)
16-inch	195/75R16 (27.5 in, −0.2%), 225/65R16 (27.5 in, −0.2%), 215/70R16 (27.9 in, +1.0%)
17-inch	225/60R17 (27.6 in, +0.2%), 305/45R17 (27.8 in, +0.8%), 275/50R17 (27.8 in, +0.9%)
18-inch	305/40R18 (27.6 in, +0.1%), 245/50R18 (27.6 in, +0.2%), 345/35R18 (27.5 in, −0.3%)
20-inch	325/30R20 (27.7 in, +0.4%), 245/40R20 (27.7 in, +0.5%), 315/30R20 (27.4 in, −0.5%)
22-inch	235/30R22 (27.6 in, −0.1%), 245/30R22 (27.8 in, +0.8%), 295/25R22 (27.8 in, +0.8%)

Popular comparisons with 275/35R20

245/40R20 vs 275/35R20−0.5% diameter

FAQ

How tall is a 275/35R20 tire?

27.6 inches (700 mm) calculated from the size code. Makers publish 27.3–27.87 in for real tires in this size; the difference comes from tread design and construction.

How do you work out the 275/35R20 diameter?

Sidewall = 275 mm × 35% = 96.2 mm. Diameter = 20 in wheel + 2 × 96.2 mm ÷ 25.4 = 27.58 in.

Is 275/35R20 a 28-inch tire?

It is about 27.6 in tall nominally, so it is close to 28 inches. Real tires in a size vary slightly by model; check the maker's spec sheet for the exact tire.

What sizes are equivalent to 275/35R20?

Real sizes within 3% of its diameter include 195/75R16 (−0.2%), 225/60R17 (+0.2%) and 305/40R18 (+0.1%). Equal diameter alone doesn't make a size suitable: wheel width, offset, clearance and load rating all matter.

How many revolutions per mile does a 275/35R20 make?

About 731 calculated from its unloaded diameter. Makers publish 749–760 revs per mile, measured under load (a loaded tire rolls on a slightly smaller radius), which is why published figures are higher.

Open 275/35R20 in the converter · Tire size chart

Important: These are calculated (nominal) dimensions, not a fitment recommendation. Real tires of the same size differ by brand and model (makers allow about ±3% of section height), and width changes with the rim it is mounted on. The math can't see wheel width and offset, clearance at full steering lock and suspension travel, load index, speed rating, or what your vehicle maker approves. Before changing size, check your door-jamb placard and owner's manual and ask a tire professional. A replacement tire must meet or exceed the load index and speed rating on the placard.