Flotation tire size

35x12.50R24 in metric

A 35x12.50R24 is a flotation size: 35.0 inches tall and 12.5 in wide, for a 24-inch wheel (889 × 318 mm). The closest metric sizes on the same 24-inch wheel are 315/45R24 (35.2 in), 355/40R24 (35.2 in) and 325/45R24 (35.5 in). Makers publish 34.53 in for real 35x12.50R24 tires (1 maker).

Diameter35.0 in889 mm

Width12.5 in318 mm

Sidewall5.5 in140 mm

Revs per mile576nominal

Wheel width10–12 inapproved by every listing

Compare 35x12.50R24 with other sizes

Set up for: comparing 35x12.50R24 with a size you're considering · Different situation?

Your current size

Current tire size

e.g. 265/70R17, 2657017 or 33x12.50R20

Where do I find my size?

It's on the tire sidewall, e.g. P265/70R17 115T, and on the tire placard sticker on the driver's door jamb (also in the owner's manual). The placard shows the size the vehicle came with; the sidewall shows what is fitted now. If they differ, use the placard as your starting point. Digits are enough here: 2657017 or 33125020.

Size you're considering

Real 35x12.50R24 tires: published diameters

Figures from the makers' own data books. They differ from the 35.0 in calculated figure because each tread design and construction measures slightly differently.

Maker (data book)	Published diameter	Revs per mile	Approved wheel width	Listings
Nitto	34.53 in	—	10–12 in	1

Sources: maker data books (PDF), checked 2026-11-05. Brand names identify the data source only.

Equivalent sizes on other wheels

Sizes that appear in the maker data books with a diameter within 3% of 35x12.50R24. Same diameter is only one part of fitting a different size.

Wheel	Real sizes within 3% (closest first)
15-inch	35x12.50R15 (35.0 in, ±0.0%), 35x13.50R15 (35.0 in, ±0.0%), 35x14.50R15 (35.0 in, ±0.0%)
16-inch	315/75R16 (34.6 in, −1.1%), 35x11.50R16 (35.0 in, ±0.0%)
17-inch	315/70R17 (34.4 in, −1.8%), 35x11.50R17 (35.0 in, ±0.0%), 35x12.50R17 (35.0 in, ±0.0%)
18-inch	285/75R18 (34.8 in, −0.5%), 305/70R18 (34.8 in, −0.5%), 325/65R18 (34.6 in, −1.0%)
20-inch	295/65R20 (35.1 in, +0.3%), 315/60R20 (34.9 in, −0.3%), 325/60R20 (35.4 in, +1.0%)
22-inch	325/50R22 (34.8 in, −0.6%), 305/55R22 (35.2 in, +0.6%), 295/55R22 (34.8 in, −0.6%)

FAQ

How tall is a 35x12.50R24 tire?

35.0 inches (889 mm) calculated from the size code. Makers publish 34.53 in for real tires in this size; the difference comes from tread design and construction.

Is 35x12.50R24 a 35-inch tire?

It is about 35.0 in tall nominally, so it is close to 35 inches. Real tires in a size vary slightly by model; check the maker's spec sheet for the exact tire.

What sizes are equivalent to 35x12.50R24?

Real sizes within 3% of its diameter include 35x11.50R16 (±0.0%), 35x11.50R17 (±0.0%), 35x11.50R18 (±0.0%) and 35x11.50R20 (±0.0%). Equal diameter alone doesn't make a size suitable: wheel width, offset, clearance and load rating all matter.

How many revolutions per mile does a 35x12.50R24 make?

About 576 calculated from its unloaded diameter.

Open 35x12.50R24 in the converter · Tire size chart · 35-inch tires

Important: These are calculated (nominal) dimensions, not a fitment recommendation. Real tires of the same size differ by brand and model (makers allow about ±3% of section height), and width changes with the rim it is mounted on. The math can't see wheel width and offset, clearance at full steering lock and suspension travel, load index, speed rating, or what your vehicle maker approves. Before changing size, check your door-jamb placard and owner's manual and ask a tire professional. A replacement tire must meet or exceed the load index and speed rating on the placard.